3418液型电子高温灌封胶

耐高温电子添补剂，亦可做耐高温电子灌封胶，能够耐180°C乃至更高的温度，耐高温电子灌封胶在没有固化前属于液体状，具有↓流动性，因此耐高温电子灌封胶只有完全固化后才能实现它的价值，固化①后能够起到防尘、尽缘、隔热、保密、防侵蚀、耐高温、防震的感化。

产品特性：

耐高温电子灌封胶组分是无☉机组分。

区分其他灌封胶的特性是，耐高温，一般的环氧树脂在100°C以上的高温就会软化大∴概烤焦，而耐高温电子灌封胶哪怕是180°C的高温，仍旧不〖会软化，反而跟着运用工夫的增添，温度的升高，机能∑　愈来愈来好，硬度，附出力进一步加强。使☆用时可以加氧化硅(白炭黑)作为固化剂一同使用，氧化硅(白炭黑)可以起到固化剂和填充ζ剂的作用。在低温70° C左右或者常温条件下彻〖底干燥，只有在彻底干燥后才可以进入高温状态下使♀用。

应用范围：

高温传感器，气相色※谱电子组件，高温炉电子组件，马弗炉电子组件，窑【炉电子组件，烤箱电子组件，煤油炉电子组」件，电炉，钢铁厂，水泥厂，煅烧炉，高温机械电子组件◤，高温电子开关，电阻，耐高温吊秤▆等等。

安全须知：

未固化的密封胶如接触到眼睛，请立即用大ω量清水清洗并送医治疗。请置于儿童接触不到的地方。

执行标准

JT/T2003-2014
NET: 120ml


3418 liquid type electronic high temperature filling adhesive
High temperature resistant electronic filling agent can also be used as high temperature resistant electronic filling adhesive, which can withstand 180°C or higher temperature. High temperature resistant electronic filling adhesive is liquid before curing and has fluidity. therefore, high temperature resistant electronic filling adhesive can realize its value only after complete curing, and can play the role of dustproof, edge, heat insulation, confidentiality, corrosion resistance, high temperature and shock resistance after curing.
Product characteristics：
The components of high temperature resistant electronic filling adhesive are inorganic. The distinction between other filling and sealing glue is that it is resistant to high temperature, and the epoxy resin is in the form of epoxy resin.
The high temperature above 100°C will soften and scorch, while the high temperature of 180 °C high temperature resistant electronic filling adhesive will not soften, on the contrary, with the increase of application time, the temperature will rise, the function will be better and better, the hardness and attachment force will be further strengthened. When used, silica (silica) can be used as curing agent, silica (silica) can play the role of curing agent and filling agent. It is completely dried at low temperature of about 70 °C or at room temperature, and can only be used at high temperature after complete drying.
Scope of application:
High temperature sensor, gas chromatography electronic assembly, high temperature furnace electronic assembly, muffle furnace electronic assembly, kiln electronic assembly, oven electronic assembly, kerosene furnace electronic assembly, electric furnace, iron and steel plant, cement plant, calciner, high temperature mechanical electronic assembly, high temperature electronic switch, resistance, high temperature hanging scale, etc.
Safety notes:
If the uncured sealant comes into contact with the eye, please immediately wash it with a large amount of water and send it to a doctor for treatment. Please leave it out of reach of children.
Implementation standards
JT/T2003-2014
NET: 120ml